GE Druck DPI 620, Руководство пользователя

Страница: 65 / 84

[EN] English - K0449 Documenting functions 7-1
Chapter 7: Documenting functions
7.1 Introduction
This section gives examples of the documenting functions
available with the DPI 620 calibrator. There are two options:
Analysis ( Section 7.2 ): This function lets you compare the
data from two Channels on the DPI 620 calibrator: the device
under test (DUT) and a reference instrument.
It calculates the % span or % reading error for the device and
then gives a pass or fail indication.
Run Procedure ( Section 7.3 ): This uses the Intecal
Calibration software (Optional item) to download a calibration
procedure.
Before you start:
•
Read and understand the “Safety” section.
•
Do not use a damaged instrument.
Note: Use only original parts supplied by the manufacturer.
7.2 Analysis
To use the Analysis function, set the functions for the two
Channels you want to compare ( Section 2.10.4 ). Then use
these procedures:
2
1
TAP
Two Tasks
1
2
3
4
Set one channel as the Input (the DUT) and the other as the
Reference. Set the options A to E.
5
Documenting Analysis
Input
Reference
7
6
A
B
C
D
E
8
Continued
A