GE DMS Go+ страница 193 Скачать руководство пользователя

Страница: 193 / 264

Software updates

8 Maintenance and care

DMS Go+

Edition 4 (05/2014)

8-5

– In the column

Title

, click the entry

USM Go/DMS Go

Software Update

– Read the displayed text

Software Terms and Con-

ditions Acceptance

and click

I ACCEPT

to confirm.

The

Registration Form

appears.

– Fill in the registration form and, finally, click

SUBMIT

The download form appears.

– In the column

Download

, click

Download Update

– Select the memory location and click

Save

– Unzip the downloaded archive file (.zip) and save the

update file (.sdu) to an appropriate location.

– Copy the update file (.sdu) to the main directory of the

SD memory card.

Installing an update

Note

Only one file with the extension

.sdu

may be

located in the main directory of the SD card
for the installation. If several update files are
located in the main directory, the installation
process is aborted and an error message is
displayed.

To install the new software, proceed as follows:

– Check whether the file has the extension

.sdu

. If not,

the file is not suitable for the DMS Go+ and must not
be used.

– Power the DMS Go+ off.

– Insert the SD memory card containing the update file

into the DMS Go+ (see Chapter 3.4

Inserting the SD

memory card

, page 3-10).

Содержание DMS Go+









































































































































































































































































Результаты поиска

Содержание DMS Go+

Отзывы:

Похожие инструкции для DMS Go+

Бренды по названию

Популярные бренды

GE DMS Go+, Руководство по эксплуатации

Результаты поиска

Содержание DMS Go+

Отзывы:

Похожие инструкции для DMS Go+

Бренды по названию

Популярные бренды