GE DigitalFlow GS868, Руководство для стартапов

Страница: 35 / 81

March 2008
2-6 Initial Setup
1- and 2-Channel Meters
(cont.)
3.
Use the
[F1]-[F4]
keys to select the Volumetric Time (units for the
volumetric flow rate display).
4.
Use the
[F1]-[F4]
keys to select the Vol Decimal Digits (the desired
number of digits to the right of the decimal point) in the
volumetric flow rate display.
5.
Use the
[F1]-[F4] and
[
→]
keys to select the Totalizer Units.
The abbreviations and definitions of all the available volumetric and
totalizer units are shown in Table 2-2 on page 2-5. The choices shown
on the option bar in the prompt screen above are determined by the
selection made at the previous
SYSTEM UNITS
prompt screen.
6.
Use the
[F1]-[F4]
keys to select the Total Decimal Digits (the
desired number of digits to the right of the decimal point) in the
totalized flow display.
7.
If the
Static Density?
prompt in the
ADVAN
submenu (
SETUP
menu)
is set to
NO
, the GS868 returns to the initial User Program screen.
Otherwise, proceed as follows:
a.
Use the
[F1]-[F4]
keys to select the Mass Flow units, listed in
Table 2-3 below.
b.
Use the
[F1]-[F4]
keys to select the Mass Flow Time units.
c.
Use the
[F1]-[F4]
keys to select the MDOT DECIMAL DIGITS
(the number of digits to the right of the decimal point) for
displaying mass flow.
d.
Use the
[F1]-[F4]
keys to select the Mass (Totalizer) units, listed
in Table 2-3 above.
e.
Use the
[F1]-[F4]
to specify the Mass Decimal Digits (the
number of digits to the right of the decimal point) for
displaying totalized mass flow. The meter returns to the initial
User (or Channel) Program screen.
Table 2-3: Available Mass Flow Units
English Mass Flow Units Metric Mass Flow Units
LB- Pounds KG - Kilograms
KLB - Thousands of Pounds
MMLB - Millions of Pounds
TONS - Tons Tonnes - Metric Tons