manualshive.com logo in svg

GE DigitalFlow GC868, Руководство по программированию

Поделиться
Скачать
GE DigitalFlow GC868 Скачать руководство пользователя страница 117

Serial Communications

6-5

April 2008

Point-To-Point Wiring

Standard factory wiring of the RS485 serial interface is configured for 
point-to-point wiring. That is, a single Model GC868 may be wired 
directly to a single personal computer. To connect the RS485 serial 
interface, refer to Figure 6-1 on page 6-4 and complete the following 
steps:

Note:

For compliance with the European Union’s Low Voltage 
Directive (73/23/EEC), a transparent plastic shroud protects 
the electrical connections. The shroud must remain in place, 
except while wiring the unit. Reinstall the shroud after the 
wiring has been completed.

1.

Disconnect the 

main power

 to the electronics console and open the 

cover.

!WARNING!

Dangerous voltages exist within the electronics console. 

Do not perform any wiring operations until the main 

power to the unit has been disconnected.

2.

Remove the clear plastic 

shroud

 that covers the electrical 

connectors.

3.

Using a 

twisted-pair wire

, connect the XMT+ terminal of the 

barrier strip to the T+/R+ terminal of the PC’s RS485 adapter and 
connect the XMT– terminal of the barrier strip to the T-/R- 
terminal of the PC’s RS485 adapter (see the documentation 
provided with the RS485 adapter for details).

Note:

The XMT+ terminal on the barrier strip is the screw opposite 
the red wire connection and the XMT– terminal on the barrier 
strip is the screw opposite the green wire connection.

4.

Reinstall the clear plastic shroud, close the cover to the electronics 
console and reconnect the main power.

The RS485 serial interface is now ready for point-to-point operation. 

Содержание DigitalFlow GC868













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды