GE CS5500 страница 79 Скачать руководство пользователя | Manualshive

Страница: 79 / 84

background image

Term

Definition

Word Library

A menu option that enables the word library. This is a predefined collection of
words that speed up text editing. As the user/installer types a character, the
keypad automatically displays a matching word. The word library is enabled by
default.

Wrong PIN Digit Entries

A menu option that specifies the maximum number of incorrect digits that can be
entered for call-back and call-in features before the panel is locked out.

X

X-10 Address

A menu option that sets the address of an X-10 device. This is a unique number
assigned to an X-10 device. It consists of the module number and house code.
The system uses this address to identify the device.

X-10 Devices

A menu entry that groups X-10 device options for the selected keypad. (This
Keypad)
A menu entry that groups X-10 device options for the selected listen-in module.
(CX534 Listen-In Module)

X-10 Function Logged
Code Entry

A menu option that activates an X-10 function when a proximity card is held near
the CS1700 proximity reader.

X-10 Functions

A menu entry that groups X-10 device information and the functions for the
selected CS1700 proximity reader.
The X-10 functions are linked to the access reader. It is possible to control X-10
devices using the badge on the card reader. It is also possible to configure the
actions that are activated by each card action.

•

0 All units off

•

1 All lights on

•

2 On

•

3 Off All others

•

4 Dim

•

5 Bright

•

6 All lights off

X-10 Message

A menu option that enables X-10 message transition broadcasts. (Transition
Broadcasts)
A menu option that enables the control panel to respond to X-10 message
commands sent by the home automation system. (Commands/Requests)

Y

Yelping Siren - Burglary

A menu option that sounds a yelping siren when a burglary zone is activated.

Z

Zone Bypass

A menu option that that sends a report to the central station when zones are
bypassed.

Zone Bypass and
Restores

A menu option that sends a report to the selected phone number when a zone is
bypassed. A report is also sent when the zone is restored (un-bypassed). (Phone
Numbers)
A menu option that sends a report to the central station when a zone is bypassed.
A report is also sent when the zone is restored. These reports are sent depending
on the condition of the panel dialler. (CS7001 GSM Module)
See also

Panel Dialler OK Events

and

Panel Dialler Not OK Events

Zone Bypass Toggle

A menu option that enables the control panel to respond to zone bypass toggle
commands sent by the home automation system. (Commands/Requests)

Zone Inact. Unit

A menu option that allows the zone inactivity option to be configured in hours or
days.

«
...
77
78
79
80
81
...
»

Содержание CS5500





















































































Отзывы:

Нет отзывов

Похожие инструкции для CS5500

Бренд: Orion Страницы: 2

Бренд: ATA Страницы: 6

Бренд: Cytech Страницы: 12

CodeLocks KL1100

Бренд: D&D Technologies Страницы: 9

Бренд: Itec Страницы: 18

SmartLine keypad

Бренд: U-Prox Страницы: 2

Бренд: Scantronic Страницы: 8

Бренд: Paradox Страницы: 2

OptionFinder Micro Plus

Бренд: Option Technologies Страницы: 9

Бренд: HOME8 Страницы: 8

Бренд: GS Access Страницы: 8

Бренд: Dormakaba Страницы: 2

Бренд: Chamberlain Страницы: 2

Бренд: ADT Страницы: 3

Бренд: York Страницы: 6

Бренд: Belkin Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды