GE CS5500 Скачать руководство пользователя | Manualshive

Страница: 9 / 84

background image

2 P

ROGRAMMING THE SYSTEM

2.1 Powering up the system

When the CS5500 if powered up for the first time, the language, keypad defaults, partition
and keypad must be set. These options must also be set each time a keypad is defaulted.

•

The language option sets the first language of the keypad.

•

The keypad defaults option sets the country specific keypad defaults. It does not
default the keypad.

•

The partition and keypad options set the keypad address.

Use the navigation keys to scroll between the different options and press

OK

to select an

option. See

Navigating the menus

for more information.

2.2 Entering programming mode

Your installer code allows you to program the system through the installer menu. There
are two levels in the installer menu. The light menu contains the most important options
and the advanced menu contains additional options.

1. Press

OK

at the system prompt and enter your installer code. For a list of default

codes, see page 6.

2. Use

the

µ¶

keys to navigate the menu. The full menu map can be found in the

Menu Structure

included in your language kit. The light menu is in green text and the

advanced menu is in black text.

3. Select

OK

to select an option or use the numerical/character keys to edit the existing

option.

To switch to the advanced menu, navigate to Commands>Advanced and select
Enabled. The keypad displays the advanced menu until this option is disabled.

2.2.1 Changing the user interface language

1. Press

OK

at the system prompt.

2. Press

OK

again to display the system prompt in a different language.

3. Press

OK

until you find the language you require.

4.

Continue using the keypad as normal.

2.3 Navigating the menus

•

Press the

µ¶

keys to scroll through menu lists and options.

•

Press

#

µ

to move to the same menu item for the previous option. For example, if

you are in a submenu for zone 2, press

#

µ

to move to the same submenu for zone

1.

•

Press

#

¶

to move to the same menu item for the next option. For example, if you

are in a submenu for zone 2, press

#

¶

to move to the same submenu for zone 3.

The keypad may timeout from the menu system and return to the default display.

2.3.1 Command

menu

You can access a limited number of menu options without entering your installer code.
This opens the command menu.

«
...
7
8
9
10
11
...
»

Содержание CS5500





















































































Отзывы:

Нет отзывов

Похожие инструкции для CS5500

Бренд: Allstar Страницы: 4

Бренд: CAMDEN Страницы: 12

Stow-N-Go AKP01US

Бренд: Targus Страницы: 14

CodeLocks KL1100

Бренд: D&D Technologies Страницы: 9

Бренд: URC Страницы: 21

Бренд: SRS Labs Страницы: 4

Бренд: Paradox Страницы: 2

OPTRMT-KIT-9000X

Бренд: Eaton Страницы: 16

Бренд: NEO Страницы: 32

Бренд: CAMDEN Страницы: 2

videofied XMB611

Бренд: VAT Страницы: 4

QS-1311-P01IQ PINpad

Бренд: QOLSYS Страницы: 2

Бренд: Carefree Страницы: 8

Бренд: URC Страницы: 7

Бренд: U-Prox Страницы: 2

Бренд: Manhattan Страницы: 2

Бренд: Sprint Страницы: 76

Бренд: Sprint Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды