6.2.5 Defining the country code
The control panel is shipped with software that contains different country default settings.
Changing the value or selecting a country code configures the panel with the
corresponding country defaults.
1. Navigate
with
the
µ¶
keys to
Country Code
and press
OK
. The current country is
displayed.
2.
Scroll through the countries and press
OK
to select the new country. For a list of
default country codes, see Table 1 on page 6.
6.3 Configuring
the
system
6.3.1 Configuring the keypads
You define keypad options for the current keypad. You can copy these settings to another
keypad. The keypad number and keypad partition are NOT copied.
1. Navigate
with
the
µ¶
keys to
This Keypad>Keypad Features
and press
OK
.
2.
Scroll through the configurable options for the keypad. Press
OK
to change an
option.
3. Navigate
with
the
µ¶
keys to
Copy Keypad
and press
OK
.
4.
To copy the current keypad settings to another keypad, select
To One Keypad
and
select the partition number.
5.
Scroll to the keypad to which you want to copy the settings and select
OK
. In this
case, select
Keypad 2
and press
OK
to copy the settings for keypad 1 to keypad 2.
6.
To copy the settings to all other keypads, select
To All Keypads
. Press
OK
to copy
the settings.
6.3.2 Configuring
zones
You can program a zone to be one of 20 different zone types.
1. Navigate
with
the
µ¶
keys to
Control Panel>Inputs>Zones
and press
OK
.
2.
A list of all zones is displayed. Select the number of the zone that you want to
configure and press
OK
.
3. Scroll
to
Zone Type
and press
OK
.
4.
Select the relevant zone type and press
OK
.
•
In this case, select
Zone 1>Zone Type
and press
OK
. Select
entry/exit
and
press
OK
.
•
Press
#
¶
to move to
Zone 2>Zone Type
. Set the zone type to burglary.
•
Press
#
¶
to move to
Zone 3>Zone Type
. Set the zone type to burglary.
•
Press
#
¶
to move to
Zone 4>Zone Type
. Set the zone type to fire.
6.3.3 Configuring the phone settings
You specify the phone number, the account number and the communication protocol that
are used to send reports to the central station.
1. Navigate
with
the
µ¶
keys to
Control Panel>Communications>Central
Station>Phone Numbers
and press
OK
.
2.
Select the relevant phone number.
3.
Scroll through the configurable options for that phone. Press
OK
to change a setting
for an option. For more information, see
Setting up a communicator
on page 22.
•
In this case, select
Phone 1
and press
OK
.
Содержание CS5500
Страница 1: ...CS875 575 275 175 Alarm system CS5500 Programming Manual September 2003 ...
Страница 83: ......
Страница 84: ...1045335 ...
