GE CS5500, Руководство по программированию

Страница: 15 / 84

•
To accept a shortened version of the word, press F3 to accept the word. Then move
the cursor to the unnecessary characters and press
¶
to delete them.
•
To reject the word, continue entering text as normal.
•
Press the
µ¶
keys to scroll through the list of word library words.
•
To disable the word library:
1. Navigate with the
µ¶
keys to Word Library and press OK .
2. The current state of the word library is displayed. In this case, it is enabled.
3. Use the
µ¶
keys to change the state to disabled and press OK .
4. The keypad beeps once to accept the change and returns to Word Library .
3.3 Installer message
Up to four messages can be displayed on the LCD when the keypad is idle or when it
times out from a menu. If you enable more than one message, the messages are shown
in a continuous cycle.
•
Installer message
You can define a message of up to two lines long that is displayed by default. You
can enable or disable this message.
•
Date and time
The current system date and time. You can edit, enable or disable this message.
•
Service required
A service message that is displayed when a system fault occurs. You cannot edit
this message but you can enable or disable it.
•
System ready/not ready
The status of the system. You cannot edit or disable this message.
To enable the installer message:
1. Navigate with the
µ¶
keys to This Keypad and press OK .
2. Select Keypad Features>Display and press OK .
3. Scroll to Custom Message and press OK . The current status of the installer
message is displayed. In this case, it is disabled.
4. Use the
µ¶
keys to change the status to enabled and press OK .
5. The keypad beeps once to accept the change and returns to Custom Message .