REM3
Hand-Held 2-Way Remote Keypad - User Manual
REM3-EU01
Printed in Canada
07/2008
PARADOX.COM
Introduction
The REM3 is a stylish wireless hand-held 2-way remote keypad. The REM3 provides independent arming / disarming in any mode
(arm, sleep, stay, or off) for two partition. It also displays the system status for both partitions with visual and audible feedback via its
two independent row of lights. Furthermore, the REM3 can display your arm status, whether you are close to home or away.
Overview
1.
How to add a remote to your system - see reverse
2.
How to unlock the remote - see below
3.
How to view system status - see below
4.
How to arm / disarm your system using arm keys - see below
5.
Understanding your remote control’s feedback - see below and Remote Control Feedback on reverse
6.
How to toggle PGMs (programmable outputs, such as a garage door) using PGM Keys - see below
7.
How to trigger panic alarms using Combo Keys - see below
8.
How to replace the battery - see reverse
Unlocking the Remote
• To prevent the keys from being
accidentally pressed, the remote is
locked when not in use. Press &
hold the Information Key [i] for one
second to unlock your remote.
• The remote will lock again after
five seconds of inactivity.
• Unlock the remote to perform any
action.
Arming/Disarming Your System
1.
Press & hold the Information Key [i] to
unlock the remote.
2.
Press the [
ARM
], [
SLP
], [
STAY
] or [
OFF
] key
for partition 1 and/or partition 2 until the
beep.
3.
Enter your user code on the remote. The
system is armed / disarmed.
Note: See the Remote Control Feedback
table on reverse for a description of the
visual and audible feedback when arming /
disarming your system.
Using the PGM Keys
1.
Press & hold the Information Key [i] to
unlock the remote.
2.
Press and hold the desired PGM key (1 to
6) for three seconds to trigger the
programmed action.
3.
Enter your user code on the remote.
Note: PGM keys can be programmed so
that there is no need to enter your user
code. Simply unlock the remote and press
and hold (3 sec.) the desired PGM key.
Consult your installer for more information.
Using the Combo Keys
1.
Press & hold the Information Key [i] to
unlock the remote.
2.
Press and hold both keys simultaneously
([x] + [
3
] or [ ] + [ ]).
Note: Combo keys are used to trigger an
action (e.g., alert the fire department &
other panic alarms) without unlocking the
remote or entering a user code. Combo
keys must be set by your installer.
Remote Control Overview
Arming/Disarming Your System
Using One-Touch
1.
Press & hold the Information Key [i] to
unlock the remote.
2.
Press the [
ARM
], [
SLP
], [
STAY
], or [
OFF
]
key for partition 1 and/or partition 2 until
the second beep. The system is armed /
disarmed.
Note: One-touch arming/disarming must
be set by your installer.
Viewing Last System Status
1.
(Can be out of range of your system)
Press & hold the Information Key [i] for
one second.
2.
The remote will then display the last
system status saved by the remote.
Remote Control Feedback
The Information light displays feedback
of both your system and your remote’s
status. See the Remote Control
Feedback table on reverse.
Viewing Current System
Status
1.
(Must be in range of your system)
Press & hold the Information Key [i]
for one second.
2.
Press & hold the Information Key [i]
again for one second to see the cur-
rent system status.
