GE AIR 326, Руководство по обслуживанию, Страница: 40 / 104

—
39
—
7.5 Battery installation for the remote controller
z
Guide to operational controls
General steps:
1 Plug to power supply and press ON/OFF button to start the unit.
2. Press MODE button to select the suitable operation mode.
3. Press the SWING button to make the swing blades swing at a certain angle. Press the button
once again to stop the swing
4. Press fan button, to set the desired fan speed.
5. Press +/- button to select the needed temperature.
Selectable steps:
6. To set up the sleep mode by pressing the sleep button at the remote controller.
7. Press TIMER button, and then press +/- button to set scheduled time.
Remarks: To select auto mode, the air conditioner will select automatically the suitable
running mode in accordance with the indoor temperature so that a comfortable ambient is
given.
z
Replace the batteries of the remote controller
The wireless remote controller uses two AAA alkali batteries
1. Slide downward the cover of battery compartment of remote controller and remove the used
batteries and replace with two pieces of new batteries (paying attention to the polarities).
2. Close the back cover of the remote controller
Note:
z
Don't mix new and used or different
types of two batteries to insert.
z
If the remote controller is not to be
used for several weeks, please take
out the battery to prevent the leakage
damaging the remote controller.
z
The operation of remote controller
should be in its operation range.
z
Remote controller should be more
than one meter's distance to TV or
sound equipment.
Cover of battery compartment
Reset button
Put in 2 Size 7 batteries