– 52 –
12. Remove the Phillips-head screw that attaches
the Power Supply Board ground wire to the
chassis.
13. Remove the 5 Phillips-head screws from the top
of the fan cover.
14. Push the top of the cooling fan cover toward the
rear of the oven, then carefully lift the baseplate
from the oven.
15. Remove the 3 Phillips-head screws that attach
the Damper Assembly to the Convection Heater
Assembly. (See
Damper Assembly
.)
16. Remove the 2 bottom Phillips-head screws that
attach the bottom of the Convection Heater
Assembly to the oven.
17. Remove the four 7-mm hex nuts that attach the
Convection Heater Assembly to the oven.
18. Position the damper toward the front of the
oven, then lift the bottom of the Convection
Heater Assembly out from the oven.
(
Continued Next Page
)
