– 15 –
Demo Mode
The sales demo mode will allow dealers to demonstrate all oven functionality with one exception. (See #1
below.)
The sales demo mode can only be entered during the initial
Clock: Set hour
display that occurs when the
unit powers up after a long (greater than 60 seconds) power outage.
When sales demo mode is initiated, 2 short-beeps are sounded and all oven functions will operate with the
following exceptions;
1. No power shall ever be applied to the heaters, halogen lamps, magnetron high voltage transformer, or
Inrush control relays. The control relays for any of these loads shall not be switched during sales mode.
2. The
DEMO
icon will be lit whenever the unit is in sales mode regardless of settings or the feature being
selected.
The sales demo mode is cleared by holding the
START/PAUSE
and
HELP
pads down at same time for a full
3 seconds. The sales mode can
only
be cleared during the same initial
Clock: Set hour
display that occurs
when the unit powers up after a long (greater than 60 seconds) power outage. After 5 seconds elapse, all
functions of the oven will return to normal operation.
The sales demo mode will be initiated by holding the
START/PAUSE
and
HELP
pads down at the same time
for a full 3 seconds.
Demo Mode On
Demo Mode On
Clock: Set hour
Clock: Set hour
AM
AM
Push
Push
Dial
Dial
to set
to set
0:00
0:00
Demo Mode Off
Demo Mode Off
When power-up occurs, software will check the special sales demo identi
fi
er code. If the code is set, then the
oven will stay in the sales demo mode. This will prevent the unit from powering back up to a normal mode if
power to the salesroom had gone off.
