
GFK-0356Q
Chapter 5 CPUs
5-37
5
CPU360
Catalog Number IC693CPU360
CPU Type
Single slot CPU module
Total Baseplates per System
8 (CPU bas 7 expansion and/or remote)
Load Required from Power Supply
670 milliamps from +5 VDC supply
Processor Speed
25 MegaHertz
Processor Type
80386EX
Operating Temperature
0 to 60 degrees C (32 to 140 degrees F) ambient
Typical Scan Rate
0.22 milliseconds per 1K of logic (boolean contacts)
User Program Memory (maximum)
Starting with firmware Release 9.0, 240K Bytes. Note: Actual
size of available user program memory depends on the
amounts configured for the %R, %AI, and %AQ configurable
word memory types (see below). For firmware prior to
Release 9.0, fixed size is 80K bytes.
Discrete Input Points - %I
2,048
Discrete Output Points - %Q
2,048
Discrete Global Memory - %G
1,280 bits
Internal Coils - %M
4,096 bits
Output (Temporary) Coils - %T
256 bits
System Status References - %S
128 bits (%S, %SA, %SB, %SC - 32 bits each)
Register Memory - %R
Starting with firmware Release 9.0, configurable in 128 word
increments from 128 to 16,384 words with Logicmaster and
from 128 to 32,640 words with Control version 2.2. For
firmware prior to Release 9.0, fixed size is 9,999 words.
Analog Inputs - %AI
Starting with firmware Release 9.0, configurable in 128 word
increments from 128 to 16,384 words with Logicmaster and
from 128 to 32,640 words with Control version 2.2. For
firmware prior to Release 9.0, fixed size is 9,999 words.
Analog Outputs - %AQ
Starting with firmware Release 9.0, configurable in 128 word
increments from 128 to 16,384 words with Logicmaster and
from 128 to 32,640 words with Control version 2.2. For
firmware prior to Release 9.0, fixed size is 9,999 words.
System Registers
(
for reference table
viewing only; cannot be referenced in
logic program)
28 words (%SR)
Timers/Counters
>2,000
Shift Registers
Yes
Built-in Serial Ports
1 (uses connector on PLC power supply). Supports SNP slave
and SNP-X slave protocols. Requires CMM module for
SNP/SNP-X master, CCM, or RTU slave protocol support;
PCM module for RTU master support.
Communications
LAN
- Supports multidrop. Also supports Ethernet, FIP,
Profibus, GBC, GCM, and GCM+ option modules.
Override
Yes
Battery Backed Clock
Yes
Interrupts
Yes
Type of Memory Storage
RAM and Flash
PCM/CCM Compatibility
Yes
Floating Point Math Support
Yes, firmware-based in firmware Release 9.0 and later.
CPU 360
PORT
ON
OFF
PS