manualshive.com logo in svg

GE 15LSWGR901, Руководство по эксплуатации и техническому обслуживанию, Страница: 141 / 188

Поделиться
Скачать
GE 15LSWGR901 Скачать руководство пользователя страница 141

 

53

Fig – A(1)-1. Do not remove the secondary disconnect block ( item # 5 ) or the chain ( 
item # 6 ). This barrier can be removed by sliding it down. This will expose the main bus 
compartment as shown in Fig – A(1)-5 
 

 

 

Fig – A(1)-5 

View looking into main bus compartment from the front  

( Porcelain inter-unit bus supports ) 

 
Step – 4, Remove glastic shipping supports 
 
Unbolt and remove the glastic shipping supports taking care to ensure that splice plates 
and spacers provided in the bus joint do not fall off. Loosely refasten bus hardware to 
hold the splice plates and spacers in place. Discard the shipping supports. The red 
insulating boots will have to be removed to access the bolts for the shipping supports. 
The boots are held together using plastic re-useable pull-apart fasteners. 
 
Step –5a, Remove inter-unit bus supports ( Go directly to step 5b if polyester glass bus 
supports are provided) 
 

a)

 

Apply strong adhesive tape so as to keep the two glastic supports together 
temporarily. The tape may be applied in 4 places – above, below and between the 
porcelain bus supports. See Fig A(1)-5 and Fig A(1)-6. In Fig A(1)-6, the bus 
support is shown outside the switchgear to get good picture clarity. It is not 
required to remove the bus supports out of the switchgear. 

b)

 

Remove the  ¼ - 20 fasteners used to mount the bus support to the side sheet. 
There should be 4 ( 2 for poly glass) on the top and 4 ( 2 for poly glass ) at the 
bottom. The hex nut should be towards the outside on the left hand side of the 
side sheet.  

c)

 

Gently remove the bus support assembly away from the side sheet and into the 
bus compartment. Let it rest temporarily in a vertical position inside the bus 
compartment. 

 

Boots 

Copper Main bus or 

Glastic shipping supt. 

Tape 

Tape 

Tape 

Содержание 15LSWGR901





























































































































































































Отзывы:

Нет отзывов