CamPlus 2 Plastic Dome IP Camera
Installation Manual
2
Product overview
The CamPlus 2 Plastic Dome IP Camera (
Figure 1
) is designed to operate from a PC on a network (10BT/
100B-TX). Once you configure your PC’s network settings and your LAN, you can use a web browser to
monitor both video and audio.
Note:
You must configure the network settings of the PC and its network environment in order to monitor images and audio
from the camera on the PC. You must also have a web browser installed on the PC.
Figure 1. Camera
Features
Camera features include:
•
The 3.6x varifocal lens provides variation of the angular field of view when installing the camera.
•
The 1/4-inch progressive CCD solid-state image sensor with VGA resolution (640 x 480 pixels)
provides high-fidelity motion image scanning in high-resolution.
•
MPEG-4 images can be monitored while recording JPEG images.
•
When you connect with a PoE (power over Ethernet, IEEE802.3af compliant) device, power is
supplied when you connect the LAN cable.
•
Audio captured by the built-in microphone can be monitored with your PC via a network.
•
The camera can be installed on a ceiling or a wall using the provided camera mount bracket. When
using an optional ceiling mount bracket, embedded installation on a ceiling is available.
•
You can set up to four designated surveillance areas, and have an alarm issued when motion is
detected.
•
The FTP backup function and recording of each log on an optional SD memory card are available
using the SD memory card slot.
Note:
Performance with this camera has been checked using Panasonic SD memory cards up to 2GB. If another SD
memory card is used, this camera may not operate properly. The SD High Capacity (SDHC) card is not compatible with
this camera.
INSERT
ADJU
ST
LOCK
DO
CO
ME
VER
DO
ME
CO
VE
R
