7
Camera mount bracket
Safety wire.
Attach this wire to the safety wire holder on the camera. Make sure that the safety wire is
securely hooked on the safety wire holder when adjusting or installing the camera. See
Camera installation
on page 12.
Installation overview
To install the camera (
Figure 4
) you will need to:
•
Make a hole in the ceiling and fix the camera mount bracket over it. See
Mount bracket installation
on
page 10.
•
Line up the ends of the cables (power cord, LAN cable, and cable from an external device) and the
safety wire, and then bundle them using the cable tie provided. See
Camera installation
on page 12.
•
Attach the safety wire to the safety wire holder of the camera. See
Camera installation
on page 12.
•
Connect the power cord (from a 12 VDC or 24 VAC power supply), a LAN cable (CAT5 or better),
and if using an optional external device, connect it also. See
Connections
on page 15.
•
Mount the camera onto the camera mount bracket. See
Camera installation
on page 12.
•
Adjust the angle of the camera, angular field of view and focus. See
Adjustments
on page 20.
Figure 4. Camera installation
LAN cable
External device
cable
Power cable
Ceiling
Cable tie
Safety wire
Safety wire holder
Camera mount
bracket