CamPlus 2 Plastic Dome IP Camera
Installation Manual
10
Mount bracket installation
Figure 6
shows the dimensions of the camera mount bracket.
Figure 6. Camera mount bracket dimensions
To mount the camera mount bracket, do the following:
1. Make a hole in the wall/ceiling. If the camera is directly mounted on a wall/ceiling, align the camera
mounting position with the position of the cable access and make the hole (
Figure 7
).
Figure 7. Bracket hole dimensions
Note:
The screw holes of the camera mount bracket are also designed to allow you to mount the bracket on a two-gang
junction box.
2. Secure the camera mount bracket (
Figure 8
). Use a sufficient quantity of mounting bolts appropriate to
the mounting surface. Tighten the bolts securely to ensure that the installed mount bracket can support
more than five times the weight of the camera.
Figure 8. Fasten the bracket
If the mounting surface is too weak to support the total weight, you must reinforce the area.
0.16 to 0.19 in. (4 to
5 mm) dia.
Ceiling cable hole
Side cable hole
1.8 in. (46 mm)
4.6 in.
(118 mm) dia.
3.3
in. (8
4 mm)
3 in. (75 mm) dia.
Make a hole
Ceiling board
Ceiling
Camera mount bracket
Anchor bolts (4)
