15
Connections
To wire the camera, do the following:
1. Connect the provided monitor cable between the monitor-out connector inside the dome cover and the
video-in connector of the video monitor (
Figure 16
).
Note:
The monitor-out connector is provided only for checking the adjustment of the angular field-of-view on the video
monitor when installing or servicing the camera. It is not provided for recording/monitoring use.
Figure 16. Monitor-out connection
2. Use the following directions to connect a power supply to the camera (
Figure 17
).
Figure 17. Power cord terminals
12 VDC/24 VAC power supply.
When using a 12 VDC/24 VAC power supply, do the following:
a. Remove 0.12 to 0.28 in. (3 to 7 mm) of the outer jacket of the power wire (AWG #16 to 28 single
core, twisted) from a 12 VDC or 24 VAC power supply and twist the core of the power wire to
prevent a short circuit (
Figure 18
).
Figure 18. Remove outer jacket
b. Loosen the screws of the provided power plug, and insert the power wires into the power plug until
the exposed core wires are completely hidden.
INSE
RT
ADJUST
LO
CK
DO
CO
ME
VE
R
N
Monitor-out
connector
Power cord terminals
Approx. 0.12 to 0.28 in. (3 to 7 mm)
