GE H
EALTHCARE
D
IRECTION
5194296-100, R
EVISION
10
LOGIQ B
OOK
XP S
ERIES
B
ASIC
S
ERVICE
M
ANUAL
7-4
Section 7-3 - Screen Captures
Section 7-3
Screen Captures
There may be times when the customer or field engineer will want to capture a presentation on the
screen. This is accomplished by first saving the image(s) to the clipboard using a Print Key.
The P3 key is the factory default print key to accomplish a secondary screen capture. However, the
default is for the video area only or the customer may have customized the P3 Key function. Therefore,
screen capture should involve the following steps:
1.) Check and record any custom settings for the Print3 button.
2.) Set the Print3 button to Whole Screen, Secondary Capture.
3.) Capture the required screens to the Hard Drive or CD-R.
4.) Restore the Print3 button to it’s original settings.
7-3-1
Check and Record the P3 Key Function
Check the function of the Print 3 Key in the event that the customer may have made some custom
settings.
1.) Click
Utilit
y on the keyboard.
2.) Select
Advanced
>
Connectivity
from the Utilities Menu.
3.) Select the
Buttons
tab on the Connectivity screen.
4.) In the
Button
field, select Print3.
The Connectivity/Buttons Screen will be displayed like the one shown in
Figure 7-2 on page 7-4
.
P3 is the factory default Screen Capture Key. If it is not set to Whole Screen or Screen Capture, as
shown in
Figure 7-2
, proceed to step 5 to record the customer’s custom settings.
Figure 7-2 Buttons Set Up Screen
