GE Consumer & Industrial ZIC360NR, Техническое обслуживание руководство

Страница: 11 / 51

– 11 –
Icemaker
Feeler Arm
Power Switch
Green
Power Light
Hex Nut
Wheel
Leveling Leg
P0003393
Water Valve
Water Filter Bracket
Rollers and Leveling
This model has 4-point leveling provided by
adjustable rollers on the rear and leveling legs on
the front. It also has 2 nonadjustable front rollers
that are used only for unit positioning.
To level the unit:
1. Turn the 7/16-in. hex nut located above the
front rollers to adjust the roller on the rear of
the unit. Turn clockwise to raise,
counterclockwise to lower.
2. Turn the front legs with a 1-1/4 in. open end
wrench to adjust the front of the unit. Turn
clockwise to raise, counterclockwise to lower.
ICEMAKER
The icemaker is mounted to the upper left wall of
the freezer cabinet. Under normal operating
conditions, temperatures, door openings, and food
load, the icemaker is capable of producing
approximately 100 to 130 cubes in a 24-hour
period.
Note: The freezer door light switch, located on
the back wall of the freezer, also serves as an
icemaker interlock (or kill) switch. It will open the
circuit to the icemaker any time the freezer drawer
is open.
To service the icemaker, refer to GE Publication
31-9063.
Water Valve and Water Line
The water valve is mounted to the side of the
water filter bracket in the machine compartment.
A plastic water line is routed from under the unit,
up the back of the cabinet, into the machine
compartment, and to the water valve.
A low-pressure plastic water line supplies water to
the icemaker from the water valve. The plastic
water line is routed from the water valve, out the
back of the machine compartment, down the back
of the cabinet to the fill tube grommet. The
icemaker fill tube is also plastic.
To Replace the Water Valve
Note: Some water may leak from the water supply
line and valve when they are disconnected.
1. Shut off the water supply to the freezer.