35
7.2. NEC Series 2 Projector
In order to configure an NEC Series 2 projector to work with SX-3000, the following steps must be
taken:
1. Switch on the projector so that it is in STANDBY mode.
2. Use the Digital Cinema Communicator for S2 Windows software provided by NEC to
connect to the projector.
3. Select [Start]
[Mode]
[Service] and enter the Service password to activate
service mode operation. (as shown in Figure 41)
Figure 41 Service Mode on NEC Digital Cinema Communicator.
4. Select [Setup]
[Option Slot] on the Digital Cinema Communicator and select IMB
for Slot B in Option Slot Setting. (as shown in Figure 42)
Figure 42 Option slot settings on NEC Digital Cinema Communicator.
5. Select [Start]
[Power]
[On] to power on the projector.
6. Clear the Service Door/Marriage Tamper on the server.
To use SX-3000 for content playback, the INPUT source of the projector macros must be set to
IMB.
