30
6.1. IMB Network Setup
To edit the IP addresses of the Ethernet ports, use the following instructions:
1.
Enter the SMS screen.
2.
Click [Configuration] to access the Configuration page.
3.
Select Maintenance access from the top drop down menu. Enter the number
password and select [OK]
4.
Select the
IMB Network
tab
5.
Enter the Subnet Mask. As well as the desired IMB IP and SOM IP addresses
(please refer to Figure 33).
Figure 33 IMB Network Tab [Configuration].
6.
Once the settings have been entered, click on [Validate IPs].
7.
If all of the IP addresses are valid, you will get the following pop-screen as follow:
Figure 34 Confirm IPs are valid.
8.
Click [OK] to exit.
