GCT TRC-0078, Руководство пользователя

Страница: 24 / 32

24
15. General SMS string information and command structure
“Security code” - “Mode” - “Subgroup1” - “Subgroup2”
Instuctions & Request functions ( I & R ) in < Mode > block. All commands have to be preceded by the security code.
Mode Subgroup1 DESCRIPTION
I SEC To change security code (Password)
I & R TRK
Track mode to set/request time “T” between GPS information transmissions
and number of repeats “R” and set SMS Check time “C”
I & R GPS
To set/request the tracker to us the specified data format like DMS (degrees,
minutes, seconds), GOOGLE (URL for Google Maps), DDEC (degrees
decimal) or a NMEA data line(GPGGA-GPGSA-GPRMC)
I & R GEO
To set or request the Geofence settings.
I & R TEL
Will direct the tracker to use another telephone number to send requested
data overriding the default caller ID
I & R SOSxxxxx
Set-up or Request SOS numbers (max 8 numbers can be stored)
I & R LOx To activate or request Line-out status. (Only for TRC0078)
I & R APN Set or Request the access point name for GPRS function.
I & R IP Set or Request the Internet Protocol address for GPRS function.
I & R UN Set or Request the User Name for GPRS access.(only if needed)
I & R PW Set or Request the Password for GPRS access.(only if needed)
I & R PORT Set or Request the Port Number for GPRS access.
R SMSxxxxx
To recall up to the last 8 transmitted SMS messages (1-8) incl. Caller ID, a
SMS command request without number will send all 8.
R M Request setting if motion sensor is switch ON or OFF
R Version Request for information about software version in the tracker
R IMEI To get the IMEI numbers of the GSM module
R GPRS
Request the GPRS settings, APN, IP ,name, password
R BAT Request battery status SMS will be sent indicating internal battery voltage
I D Will change all settings back to factory default settings.
Direct commands in “Mode” block:
Mode Subgroup1 DESCRIPTION
S Set Tracker in Single mode. One position data will be sent.
T
Set Tracker in Track mode. Tracker will send repeated position data. Default
setting is T0003R020C010 meaning every 3 minutes for 20 times a message will
be sent and every 10 minutes a check will be carried out if new instruction
message(SMS) was sent.
Last Tracker will send LAST valid GPS data
GEO ON/OFF To switch the GEOFENCE function ON or OFF. (Default is OFF)
M ON/OFF
To switch the Motion sensor ON or OFF. (Default is OFF)
LOx ON/OFF
To switch the number x Line-out ON or OFF. (Default is OFF) (TRC0078 only)
PS ON/OFF To switch the Power Saving mode ON or OFF. (Default is ON)
<Subgroup2>
Instruction information like: Telephone numbers; settings of T , R and C ; data
format for GPS information ( DMS , Google , Ddec , NMEA, GPGGA-GPGSA-
GPRMC) etc.