10
4.4 TEL MODE (Overriding caller ID)
The Tracker can be instructed to send the SMS messages to other telephone number than
the caller ID telephone number of the mobile phone from which the original set-up
information or request for information was sent. This can be useful in, for example, a
roaming situation where the callers ID is not always correctly presented or where the caller
is running out of battery power and would like to switch over to another mobile phone. The
tracker can be instructed to override the default mode to SMS back to a specified
telephone number by sending the following string:
Password-I-TEL-xxxxxxxxxxx
xxxxxxxxxxx= <+><country code><phone number>
Any subsequent instruction sent to the tracker will override this setting and return to use
the caller ID telephone number, the only exception is the command:
Password-R-TEL
4.5 SOS PHONE NUMBERS
To enter SOS phone number(s)(max 8) the following string has to be sent via SMS:
Password-I-SOS#-xxxxxxxxx
xxxxxxxxx= IDD phone number max 16 digits incl. +
SOS
1
is the 1st SOS IDD number, SOS
2
is 2nd etc. A SMS will be sent to the caller ID to
reconfirm each new setting and to the new SOS number a SMS will be sent with text info.
“You will receive GPS coordinates in case of emergency”
To erase a phone number, just send:
Password-I-SOS#-0
4.6 GEOFENCE MODE
The geofence mode creates a virtual circular boundary around the unit’s location. The
radius of this circle can be set by the following command:
Password-I-GEOxx
xx
is the radius x 100m. (For TRE0078
xxx
)
For example, “GEO01”, means 100m. This is also the default radius.
(Or GEO001 for TRE0078 which has a 3 digit input)
A confirmation SMS will be sent to indicate the settings.
4.7 DEFAULT MODE
The unit can be set to all the original default settings, except the password, with command:
Password-I-D
A SMS will be sent to the caller ID to reconfirm the default settings
.
