GCC Technologies LaserPro Venus II, Руководство пользователя

Страница: 107 / 118

- 107 - 232001280G(13)
INSTALLATION:
1) Remove the plugs on the air compressor to expose the air inlets.
2) Fasten the included air tube fastener valve to the outgoing air inlet (indicated by 2a) and the
air filter into the ingoing air inlet (indicated by 2b).
3)
Connect a ¼” tubing to the air tube fastener valve on the air compressor.
4) Locate the air tube valve positioned towards the front side of VENUS. As indicated below:
5)
Take the unattached end of the ¼” air tubing (other end already connected to air compressor)
and connect it to the air tube connector on the air assist valve. Make sure you press down on
the air tube fastener when inserting the ¼” air tubing, to form a tight, secure attachment as
indicated in the diagram below.
2a
2b
Plugs Plugs
NOTE
It is important that the ¼” air tubing has clean, straight cuts on each end. Jagged or
slanted cuts will not produce adequate sealing capabilities.