GCC Technologies LaserPro SmartCut X380 Series, Руководство пользователя

Страница: 47 / 78

☼
Navigating to this page:
Other Page
- 45 - SmartCut X380 User Manual
The Other Page allows you to change various settings relating to the control panel. The
Language setting will allow changing available languages displayed by the control panel. The Unit
setting will allow you to chance whether the units displayed by the control panel is in the metric or
imperial system. The EOF (end of file) Alarm setting will enable or disable an audible notification
when your jobs are complete. The Air Delay setting allows you to specify the delay in seconds of
the SmartAIR air-assist after the point of laser firing.
ƒ
Language: ENGLISH (others dependent on Firmware)
ƒ
Unit: METRIC / ENGLISH
ƒ
EOF Alarm: YES / NO
ƒ
Air Delay: 1-100 seconds
TIP
Depending on the material you are working with, your laser settings, and the desired
results, please experiment with the air delay to achieve your desired results.
Other Page
Relevant Buttons Function
F1 (Back) Back to previous page
F4 (Save) Save your current settings
U
/
V
Directional Scroll through the menu selections
Y
/
Z
Directional Adjust the value for that selection
Start / Stop Back to Main Work Page
Auto Focus Initiate the auto focus function
▲
/
▼
Manual Focus
Buttons
Manually adjust the height of the work table (Z-
axis)
Main Work Page
Press F4
Functions Page
Select < Machine Setting >
from the menu
Machine Setting Page
Select < Other > from the
menu
Other Page
Distributed & Supported by: Jorlink USA, Inc. | Tel: (336) 288-1613 | sales@jorlink.com | www.JORLINK.com