SmartCut X380 User Manual
- 27 -
Directional (
U
/
V
/
Y
/
Z
)
- Four directional buttons allow you to navigate the selection cursor
through the control panel menu and adjust the value of specific settings. In general, the
U
/
V
directional buttons cycle through the various selections, while the
Y
/
Z
directional buttons adjust
the value of that particular selection.
Enter
– Confirms the current selection.
Start / Stop
– Allows you to start or stop jobs, once those jobs have been successfully loaded
onto the system.
Delete -
Provides quick access to delete the current job.
Pause
– Pauses the current job process. Press again to resume the current process.
Auto Focus
– After you have positioned your material and moved the laser carriage head to the
area you want to work, press this button and the system will automatically adjust the optimal
vertical focal distance for the laser.
Manual Focus
(
▲
/
▼
)
– To manually adjust the vertical focal distance between the laser head
and the material, you can use the
▲
/
▼
buttons to do so. Doing so will adjust the vertical height
(z-axis) of the worktable.
Distributed & Supported by: Jorlink USA, Inc. | Tel: (336) 288-1613 | [email protected] | www.JORLINK.com
