GCC Technologies LaserPro E200 Series, Руководство пользователя

Страница: 61 / 100

60
7.3.4 Using the LaserPro E200 Print Driver >> Pen Page
Mode Setting [DEFAULT SETTING: Black & White]
You can select four primary mode settings, depending on your application or results you would like to
achieve.
Black & White: Select this mode when using clipart images or drawings with several colors,
shades of gray, or many outlines. This mode outputs in a method similar to that of a black and white
laser printer. The entire selected image will be engraved using a single set of power & speed
settings (the black pen from the PEN menu. Please refer to the next section of the manual for
details regarding the PEN functions). The LaserPro E200 print driver will interpret colored and
shaded areas as different shades of gray by producing a halftone effect while engraving. Instead of
engraving only solid lines, gray/halftone areas will be a collection of dots with varying density.
The resolution and depth of these halftone areas can be adjusted with the DPI setting found on the
Options page. Please note that selecting the Black & White mode will add a new Raster page to the
menu. The Black & White mode dithering settings can be changed from the Raster page. (Please refer
to the Raster section below for details). Experiment with different dithering settings to attain the desired
results.