background image

DUODYNATOR

® 

1049 

7

 

 

 

gbo

 Medizintechnik 

AG 2008

 

Version 1.3

 

1.2 Operating concept 

1.2.1  Ergonomic control panel 

The control panel possesses softkeys as function keys. Function keys activate a function of the device. All 
keys are easy to feel and have a pressure point.  
 
 

1.2.2 Display 

The device is equipped with a high-resolution graphic display (240 x 128 pixel resolution). The parameters 
and measuring values of the selected current type are shown there. 
 
 

1.3  Optical and acoustical user support 

1.3.1  Optical user support 

Optical user support is given in the form of 

LED lights

 incorporated into the 

keys

.

 

 

LED

 

key position

 

flashing 

key 

was selected and remains active 

constantly lit 

key 

is selectable 

not lit 

key 

is not active and not selectable 

Table 1: 

Optical user support

  

 
Furthermore, an optical user support is furnished on the 

display. 

A modification, which is just being 

changed, is shown 

inversely

 
 

1.3.2  Acoustical user support 

The following table explains about the acoustic signals and their meaning: 
 

Type of signal 

Cause 

Confirmation beep

 

• 

Admissible pressing of a key. 

Information sound 

• 

The patient plug is unplugged during operation. 

• 

A limit of voltage or power has been reached. 

• 

When turning the intensity regulator without activated channel. 

Triad gong

 

• 

At the end of the faultless automatic check at the start of 
operation. 

• 

At the end of therapy. 

Table 2: 

Acoustical user support

  

Содержание DUODYNATOR 1049







































Отзывы: