ADDITIONAL ASSEMBLY INSTRUCTIONS
We have made an improvement to your Gazelle
®
. This unit includes new parts
to be assembled on your Gazelle
®
after you have completed the unit assemb
ly.
Tools Required: Phillips Screwdriver Parts Included: Covers for Limiter (4 pieces)
4 Screws
COVER INSTRUCTIONS FOR SWING ARM LIMITER
When the two halves of the Cover are placed
together and fastened to the Frame Tubes, the
Locking Tab will automatically lock together.
This view shows Tab on the inside Cover.
Attach the Covers to the top and bottom of the
Frame Tube. Make sure all surfaces fit snugly
around the Tubes.
Front and Back Cover used on both the Left and
Right Swing Arm. Note the Locking Tab.
This is how the Covers look after installation.
Installation is the same for the left and right side
of the Frame.
© 2022, 2017 Gazelle Home, LLC. Gazelle
®
is a registered trademark. All rights reserved.
No part of this document may be reproduced or utilized in any form, by any means electronic, mechanical or otherwise without the express written consent of the copyright holder.
GAZSWINGAL1022
Locking Tab
Front Cover
Back Cover
Locking Tab
Cover fits snug
to Frame