EN
9
12
BACKLIGHT
The Gauss MiL LCD is equipped with a built-in backlight for operation in dark
conditions. It has
4 brightness levels.
The last selected level will be saved in the detector’s memory after it’s turned off.
When you turn on the detector, the LCD backlight - even if it’s switched off - also turns on
automatically for a short period of time.
Press and hold to turn the backlight on or off. When
the backlight is turned on, the icon will appear at the
top of the screen and the brightness will increase smoothly
to a set value.
If you continue holding down while turning on the
backlight, you’ll be able to choose one out of the 4
brightness levels in approximately 2 seconds.
10
TARGET ID IN THE AN MODE
Target ID is the number produced by the device while identifying a buried object based on the
electromagnetic properties of metals and physical dimensions of the item found. Ferrous targets
mostly produce negative numbers (-9, -8…-1) whereas non-ferrous targets – positive numbers (0,
1…90). The last detected Target ID value stays on the display for 5 seconds until another object is
detected.
11
BATTERY STATUS INDICATOR
While in operation, the detector is
capable of continuously monitoring the
current battery level which will be
shown in the status bar at the top of the
screen.
When the battery charge is almost
exhausted, the battery status indicator
starts blinking and your
headphones/speaker will emit a short
sound warning that the battery needs
charging.
Important! When the battery level is
critically low, the detector will turn off
automatically.
80% – 100%
60% – 80%
40% – 60%
10% – 20%
<1%
(charging required)
