GA600AC Sliding Gate Opener User Manual
4
Technical Parameters
Model
GA1000AC
Power Supply
110VAC/60Hz; 220VAC/50Hz
Motor Power
300W
Gate Moving Speed
12m/min
Maximum Loading Weight
1000KG
Remote Control Distance
≥30m
Remote Control Mode
Single button mode / Three button mode
Limit Switch
Spring limit switch / Magnetic limit switch
Working Noise
≤56dB
Working Duty
S2, 20min
Recording of up Remote Controls
25
Remote Frequency
433.92 MHz
Working Temperature
-20°C - +70°C
Overlook Size
293x247x300mm
Package Weight
16KGS
Installation
Before You Start
·
GA1000AC Sliding Gate Automation Kit is suitable for powering the opening and closing motion
of gates up to 1000kg in weight, up to a length of 12m.
·
Gate motion is achieved by the rotating output gear of the gate opener driving the gear rack
(sold separately) fitted to the moving gate.
·
The gate opener requires you to press the remote control once to open, and once again to
close. This is a safety feature to ensure safe operation.
·
The opener must be fitted within private property, never externally to a property’s boundary.
Any works done to the gate opener must be completed whilst the power is off and the
opener is unplugged. Any modifications/alterations/works to AC power components must
only be completed by a licensed electrician.
Tools Required
·
Tape measure
·
Level
·
12mm concrete drill and hammer (when uses expansion screws)
·
Phillips head screwdriver
·
Straight screwdriver
