GA600AC Sliding Gate Opener User Manual
27
4. Sensitivity of obstacle is
too high (Intelligent type).
5. Hall sensor parts
damaged (Intelligent type).
2. Ensure that the photocell mounting
position can be mutually aligned.
3. Remove the obstacle.
4. Reduce the sensitivity of obstacle.
5. Replace hall sensor parts.
Remote control
doesn’t work.
1. Battery level is too low.
2. Remote control not
paired.
1. Change the battery.
2. Pair the remote control to the gate
opener.
Press OPEN, CLOSE
button, the gate is not
moving, motor has
noise.
1. Capacitor damaged.
2. Capacitor is poor
connected.
3. Gate moving is not
smoothly
1. Change capacitor.
2. Check the capacitor wiring.
3. Adjust the motor or gate according to
the actual situation.
Not stop when
running to opening or
closing limit switch
position.
1. The opening or closing
limit switch is in opposite.
2. Magnetic limit switch
badly installed.
1. Check whether the limit switch wiring
is consistent with the motor running
direction.
2. Check whether the distance and
height between magnetic limit switch
and motor reaches to standard
requirement.
Leakage switch
tripped.
Power supply cable short
circuit or motor wire short
circuit.
Check wiring.
