Instructions for DKC500ACL/DKC800ACL
www.gatexpertstore.com
12
Open Position
·
Position gate 150-200mm back from the gate stop open position. This will help in making sure
you do not slam the gate into the end stop/catch when setting the open position under power.
·
Fit limit switch stop onto the top of chain at the point where it meets the magnetic limit switch on
the motor.
·
Tighten locking screws of limit switch stop.
Test the magnetic limit switch stops by moving the gate manually until you hear a click, making sure
contact is made with the magnetic limit switch on the motor.
Magnetic limit switch
switch
Magnetic limit switch
switch
