Gateway GT5042j, Справочник по аппаратуре

Страница: 25 / 48

CHAPTER 3: Maintenance Basics www.gateway.com
22
Adding or replacing a hard drive
Caution
Before replacing the hard drive in your
computer, you must create restore discs
and print a copy of the restore chapter in
the User Guide. If this is not done, you will
not be able to reinstall your drivers and
programs.
To add or replace a hard drive:
1
Create restore discs and print the restore chapter in the User Guide . To
access the User Guide , click Start , All Programs , then click Gateway
Documentation .
2
Remove the side panel by following the instructions in “Removing the side
panel” on page 12 .
3
If you are adding a new drive, go to Step 7 .
- OR -
If you are replacing an existing drive, go to the next step.
4
Disconnect the drive cables, noting their locations and orientation. (You
will reconnect the cables after you install the new drive.)
5
Slide the drive release latch in the direction shown.
6
Remove the hard drive by sliding it out of the drive bay.