Gateway GT5042j, Справочник по аппаратуре

Страница: 26 / 48

Replacing the front fan www.gateway.com
23
7
Note any jumper settings on the old drive and set the jumper on the new
drive to be the same. If you are installing a new drive, follow the
manufacturer’s instructions.
8
Slide the new drive into the drive bay, then secure it in the drive bay by
sliding the drive release latch in toward the computer.
9
If you are replacing a drive, reconnect the drive cables using your notes
from
Step 4 . If you are installing a new drive, follow the manufacturer’s
instructions.
10
Replace the side panel by following the instructions in “Replacing the side
panel” on page 15 .
11
Reconnect all external cables and the power cord.
12
Turn on your computer.
13
If you installed a new drive, format and partition the drive according to
the manufacturer’s instructions (available on the manufacturer’s Website).
14
If Windows does not start, install Windows using the operating system CD
that came with your computer, then install the drivers and applications
using the drivers and applications disc that you created. Follow the
instructions in the restore chapter of the
User Guide that you printed to
reinstall the drivers and programs.
Replacing the front fan
To replace the front fan:
1
Remove the side panel by following the instructions in “Removing the side
panel” on page 12 .
Jumper