Gateway ALR 9250R, Руководство пользователя

Страница: 82 / 226

68 Gateway ALR 9250R User’s Guide
6.
Secure the drive with the mounting screws supplied with the drive.
7. Connect the device cable to the device, making sure that pin 1 on both
cable and device are aligned.
8. Locate the appropriate connector on the system board for the device
you are installing.
9.
Connect the drive cable to the corresponding connector on the system
board, making sure to match pin 1 on both system board and drive
connectors. On most standard cables, pin 1 is designated by a colored
wire on the cable. In some cases, the device connector is keyed.
10. Connect the device to the power supply using an available power
connector.
11.
Reinstall the top cover and power up the system.
12.
Enter the BIOS Setup program by pressing
F2
before the system
boots.
13.
Verify the new configuration information in BIOS Setup, then reboot
the system.
3.5-inch devices
The drawer includes a 3.5-inch slimline diskette drive that is co-bracketed
with the slimline CD-ROM drive above the 5.25-inch drive bays. If the
drawer includes the optional 3.5-inch RAID cage, it provides space for up
to three 3.5-inch SCA-2 SCSI drives. You can install one 3.5-inch drive in
the internal mounting bracket inside the drawer.
Warning!
The top cover must be
closed and secured while
the system is running.
!
9250R.book Page 68 Friday, April 9, 1999 9:44 AM