Gateway 910 Series, Системное руководство

Страница: 45 / 129

Replacing or adding memory
37
Replacing or adding memory
The SDRAM DIMMs supported by your system board conform to the following
standards:
■
128 MB, 256 MB, and 512 MB DIMMs
■
PC133-compliant, Registered, ECC SDRAM
■
128 MB minimum system memory
■
2 GB maximum system memory
■
Single- or double-sided configurations
Memory is installed in four DIMM sockets on the system board. When you
are selecting and installing DIMMs, keep the following in mind:
■
No jumper settings are required for the memory size or type because the
BIOS automatically detects this information.
■
DIMMs must be installed in the lowest numbered slot first.
■
For additional DIMMs, contact Gateway.
To add DIMMs:
1 Observe the safety and ESD precautions in “Preventing static electricity
discharge” on page 15.
2 Turn off the server, then disconnect the power cord(s), modem cable (if
installed), and all external devices.
3 Remove the cover panel. (See “Removing the cover panel” on page 17.)
4 If necessary, carefully move the cables aside to gain access to the DIMMs.