manualshive.com logo in svg

Gateway 910 Series, Системное руководство

Поделиться
Скачать
Gateway 910 Series Скачать руководство пользователя страница 41

Replacing or adding drives

33

Replacing the hard drive

The hard drive is included in the original configuration. If you need to replace 
the hard drive, perform the instructions that follow.

 To remove the hard drive:

1

Observe the safety and ESD precautions in “Preventing static electricity 
discharge” on page 15.

2

Turn off the server, then disconnect the power cord(s), modem cable (if 
installed), and all external devices.

3

Remove the cover panel. (See “Removing the cover panel” on page 17.)

4

Place the server in the upright position.

5

Disconnect the power and data cables from the back of the drive, noting 
their locations and orientations. (You will reconnect these cables after you 
install the new drive.)

6

Pull the drive release latch toward the open side of the chassis (unlocked 
position).

7

Pull the drive out of the drive cage.

Drive
release latch

Содержание 910 Series


































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды