Gateway 910 Series, Системное руководство

Страница: 83 / 129

CD drive problems
75
■
Turn off the server, disconnect the power cord and modem cable (if
installed), remove the cover, and make sure that all cables inside the case
are attached securely. Also, make sure that the colored cable edges are
aligned correctly and that the connectors do not miss any pins.
Disconnect and reconnect the cables. Close the case as described in
“Closing the case” on page 21, reconnect the modem cable and power
cord, then turn on the server.
■
Turn off the server, disconnect the power cord and modem cable (if
installed), remove the cover and, if you have the proper test equipment,
make sure that the new battery has power. (Although unlikely, your new
battery may be defective.) Close the case as described in “Closing the
case” on page 21, reconnect the modem cable and power cord, then turn
on the server.
CD drive problems
The server does not recognize the CD drive
Probable cause Solution
The CD is not intended for PC
use Make sure the CD is PC-compatible.
The CD is loaded incorrectly Make sure the label is facing up, then try again.
The CD is scratched or dirty Try cleaning the CD with a lint-free cloth. Make
sure the CD is not scratched.
The CD drive needs to be
added as new hardware In the Control Panel window (Start | Settings |
Control Panel), double-click Add/Remove
Hardware. Follow the on-screen instructions
for adding the drive.
The CD cables are not
installed correctly Open the server and make sure all cables
between the controller and the CD drive are
connected correctly.
The CD drive may be
defective Replace the CD drive.