![background image](http://html1.mh-extra.com/html/gates/z100/z100_setup-use-and-care-manual_3761163032.webp)
Optional External Monitor EM50 or EM43
Page 32
Gates Underwater Products, Inc
13685 Stowe Drive • Poway, CA • 92064 • 858.391.0052 • 800.875.1052 • 858.391.0053
[email protected] • www.GatesHousings.com
3. Connect to the
camera with the short
HDMI patch cable
provided with your
EM50.
Monitor mounting and Connection –EM50
Slide the dovetail and monitor
into the grooves on top of the housing and tighten in
place with the thumbscrews (similar to the EM43 above)
Insert the HDMI connector through the bulkhead pass through
as shown below.
Route the HDMI connector
to the rear of the housing.
Connect to the camera
with the HDMI patch cable.
1. Insert the EM50 cable to
the pass through bulkhead
connection;
2. Route the cable to the
rear of the housing;