Gates Z100, Руководство по установке, использованию и уходу

Страница: 10 / 34

Camera / Housing setup Page 10
Gates Underwater Products, Inc
13685 Stowe Drive • Poway, CA • 92064 • 858.391.0052 • 800.875.1052 • 858.391.0053
Customer.srvc@GatesHousings.com • www.GatesHousings.com

Remove the camera tray from the housing. The tray is released by rotating the
locking latches 90 degrees in opposite directions. Refer to the drawing below. Once
released, the tray will easily slide out of the housing.

Pull out controls on the left side of the front shell as far as they will go. Note that
controls will be addressed in greater detail in a subsequent section.

Pull out video and audio connectors (if applicable) and wrap to the side or top of
the housing out of the way for camera insertion.
To remove the camera
tray rotate the latches
90 degrees.