Camera / Housing setup
Page 9
Gates Underwater Products, Inc
13685 Stowe Drive • Poway, CA • 92064 • 858.391.0052 • 800.875.1052 • Fax 858.391.0053
[email protected] • www.GatesHousings.com
Preparing the Housing
Release the latches.
Release the three stainless steel safety latches that secure
the housing halves. They have a
positive locking
feature, so to open them you must
first depress the center bar release while lifting the rear lever.
Open the housing.
Separate the rear half of housing from the front.
Pull out the
controls on the
left side of the
housing.