Gates Z100, Руководство по установке, использованию и уходу

Страница: 31 / 34

Optional External Monitor EM50 or EM43 Page 31
Gates Underwater Products, Inc
13685 Stowe Drive • Poway, CA • 92064 • 858.391.0052 • 800.875.1052 • Fax 858.391.0053
Customer.srvc@GatesHousings.com • www.GatesHousings.com
Loosen the thumbscrews,
slide the monitor onto the
top rail, then tighten
gently to secure.
EM43 shown.
Plug the EM43 monitor
into the bulkhead
connector on the
housing.
Optional External Monitor EM50 or EM43
This section covers mounting and camera connection of the optional monitor to the Z100
housing and connection to the camera. Refer to the Setup, Use and Care guide for the
EM50 or EM43 external monitor for other details.
Monitor mounting and Connection –EM43

Slide the dovetail and monitor into the grooves on top of the housing and tighten in
place with the thumbscrews.

Plug in the monitor cable to the housing bulkhead connector, which is found on the
right side of the housing.

Verify operation once again to ensure all is working properly prior to use in water.