- 12 -
Installation
Installation
Installation
Installation....
NOTE:
NOTE:
NOTE:
NOTE: As of approximately December 2011 NiTRO
and NiTRO-X
cabling has changed.
The text below describes cabling after December 2011. For systems purchased and installed
prior to December 2011 please see Appendix for detailed cabling instructions.
Mounting Installation Instructions.
Mounting Installation Instructions.
Mounting Installation Instructions.
Mounting Installation Instructions.
•
Remove NiTRO
or NiTRO-X
DVR and its associated mounting bracket from the
shipping box and set aside in a safe location.
•
Choose an appropriate location on the bus for mounting the NiTRO
/ NiTRO-X
DVR.
•
Various mounting options can be considered e.g. On Bulkhead; Under Dash, etc. as long
as the unit is not inverted.
•
Using the Mounting bracket as a template, orientate and mark the location of the 3
mounting holes.
•
Use supplied self tapping screws, #8 x ½” hex head with internal start washer, to mount
the bracket securely.
Power Connections.
Power Connections.
Power Connections.
Power Connections.
Figure 1: NiTRO
or NiTRO-X
With Cables.
- 57 -
Retrofitting GSX / VCR Systems to NiTRO
Retrofitting GSX / VCR Systems to NiTRO
Retrofitting GSX / VCR Systems to NiTRO
Retrofitting GSX / VCR Systems to NiTRO
and NiTRO
and NiTRO
and NiTRO
and NiTRO----X
X
X
X
Systems.
Systems.
Systems.
Systems.
Please Note:
Please Note:
Please Note:
Please Note: The cabling required for installation of either a NiTRO
or NiTRO-X
System is
specific for that particular model and is not interchangeable. It is essential that the following
instructions be followed only for the model purchased, either a NiTRO
or NiTRO-X
System.
VCR/GSX to NiTRO
VCR/GSX to NiTRO
VCR/GSX to NiTRO
VCR/GSX to NiTRO
DVR
DVR
DVR
DVR with or without GPS Module
with or without GPS Module
with or without GPS Module
with or without GPS Module
(A). CAB000215 ((((((((A1) Power. (A2) Sensor. (A3) GPS))
))
))
)) connects to Existing VCR Power
Harness DB25 Connector (E).
OR
OR
OR
OR
(B). CAB000214 ((((((((B1) Power. (B2) Sensor))
))
))
)) connects to Existing VCR Power Harness DB25
Connector (E).
(C). CAB000212 (Single Channel) OR CAB000213 Adapter cable connects to GSWHC2-XX
existing Camera Cable (D)
