Gatekeeper Systems Fleet Safety, Security and Tracking Solutions G4-304SD1, Руководство пользователя и инструкция по установке

Страница: 121 / 149

G4-304SD1 User Manual & Install Guide
121 of 149
6.5.4 Driver Alert Button: Setup
A Driver Alert Panel is available as an optional accessory for the G4-304SD1.
The Driver Alert Panel must be installed using the provide Tek screws. The
Driver Alert allows for the driver of the vehicle to press the button and mark
the recorded video with an Alert. This makes searching for Alerts far faster
and easier as G4 Viewer Plus can be set to display Alarms/Alerts.
The Driver Alert Panel requires setting up in the configuration of the
G4-304SD1. Navigate to Setup

Alarm

Panel Alarm. Check the Enable box.
Alarm Type should be set to Alarm.
Trigger relates to the amount of time, in seconds, of pre-recording will be included from when the
Driver Alert button was pressed. Linkage is currently unsupported by Gatekeeper Systems.
If the Driver Alert button has been pressed during the vehicle’s route this alert will be easy to find
using Gatekeeper Systems G4 Viewer Plus when playing back the video on a PC.
Serial Port Settings.
Dual LED Driver Alert
232-1 Control Panel 19200
10 LED Driver Alert
232-1 Control Panel 9600
6.5.5 Video
Navigate to: Main Menu

Setup

Alarm

Video
This subsection enables you to set up the trigger for alarm events based on video loss, and also to
define the actions that will be taken when the alarm occurs.
Video Videoloss Checkbox – if selected, enables the device to
monitor for videoloss events. In case of
videoloss detected on the specified camera
channels, this alarm will be triggered.
DEFAULT SETTINGS:

Checkbox – Selected
Alarm Type Drop list to select the classification level for the
alarm:

Event

Alarm

DEFAULT SETTINGS:

Alarm