Gatekeeper Systems Fleet Safety, Security and Tracking Solutions G4-304SD1, Руководство пользователя и инструкция по установке

Страница: 41 / 149

G4-304SD1 User Manual & Install Guide
41 of 149
4.8 Step 8: Setting Up Recording
This next step is a crucial step, where you will select which cameras to record video from, and also set
up the quality and resolution of the recorded video.
Navigate to:
Main Menu

Setup

Surveillance

Record
Please review and adjust the following default settings to match your actual camera configuration. For
a detailed explanation of each setting, please see
Section 6.4.2 .
General System DEFAULT SETTINGS:

NTSC
Overwrite DEFAULT SETTINGS:

By Capacity
Lock Duration DEFAULT SETTINGS:

7 days
Pre-Recording DEFAULT SETTINGS:

Checkbox – Unselected
Main Stream Channel Name DEFAULT SETTINGS:

Channel 1 – set name as – CH1

Channel 2 – set name as – CH2

Channel 3 – set name as – CH3

Channel 4 – set name as – CH4

Channel 5 – set name as – CH5
The device comes pre-configured with
standard names for the camera channels. You
may change these names if desired to give each
channel an easily remembered and/or location-
specific name.
Maximum of: 5 characters
Notes:
-
Channels 1 to 4 are analog channels.
- Channel 5 is a Digital IP camera channel.
Enable For channels 1 to 4, only enable the channels
which actually have cameras connected. Please
note that the system will show a video loss
message on channels which are enabled, but