Gatekeeper Systems Fleet Safety, Security and Tracking Solutions G4-304SD1, Руководство пользователя и инструкция по установке

Страница: 25 / 149

G4-304SD1 User Manual & Install Guide
25 of 149
4 Camera On-screen View

In 4 Camera (Quad) On-screen View mode, the screen is split into four sections (using a 2x2
grid layout) and video from four cameras is simultaneously shown on the screen.

In order to select a specific camera for viewing, you may press any of the keys [1-5] on the ICD2
to immediately jump to that channel and display the video stream from the corresponding
camera. This will switch the display to Single Camera On-screen View to display the video from
the selected camera.

Alternatively, with the Finger Mouse or the ICD2, you could also click on any video stream on
the (2x2) grid display to immediately jump to that channel and display the video from the
corresponding camera. This will switch the display to Single Camera On-screen View to display
the video from the selected camera.

Once you have selected a channel to view, you can cycle through the available channels
iteratively in quad grid display mode by pressing the key zero [0] on the ICD2.
9 Camera On-screen View

In 9 Camera On-screen View mode, the screen is split into nine sections (using a 3x3 grid layout)
and video from all connected cameras is simultaneously shown on the screen. Note: all other
areas will display a black box.

In order to select a specific camera for viewing, you may press any of the keys [1-5] on the ICD2
to immediately jump to that channel and display the video stream from the corresponding
camera. This will switch the display to Single Camera On-screen View to display the video from
the selected camera.

Alternatively, with the Finger Mouse or the ICD2, you could also click on any video stream on
the quad grid display to immediately jump to that channel and display the video from the
corresponding camera. This will switch the display to Single Camera On-screen View to display
the video from the selected camera.
Notes

Channels which do not have cameras configured on them will just show a black display.

Any channel which is configured with a camera, but is not receiving any video signal
from that camera will show a Video Loss message on the screen.