Stand-by
Status indicator flashes
Rotary switch in SLC position: Display shows SLC
Rotary switch in any other position: Display shows 0
•
Controlling the appliance in Power mode
If there is already a pan on the hob when you switch the appliance on or if you place a pan on the cooking surface
(4) while the appliance is on stand-by, there will be a power output to the pan immediately. The power output level
depends on the position of the rotary switch (1) . The status indicator (2) lights up continuously. The display (3) uses
10 levels to indicate the power output. It can display the numbers 1–8 as well as P9 and P10 for the highest power
range (power levels). Turn the switch to the right to increase the power – to reduce it, turn the switch to the left. The
InductCook
®
330 appliance features continuously variable power control. This means you can control the power very
precisely via the rotary switch. The 10-level display is merely there as a guide to help you
Power mode active
Status indicator lights up continuously
Display shows 1-8, P9, P10
•
Controlling the appliance in SLIDECONTROL mode
If there is already a pan on the hob when you switch the appliance on or if you place a pan on the cooking surface
while the appliance is on stand-by, automatic pan type recognition is activated and the display briefly indicates the
selected pan type. Power is immediately output to the pan. The display then shows the effective power consumption
in kilowatts (kW). Example: If the display shows 2.30, it means the pan is consuming 2.3 kW of power. The status
indicator lights up continuously.
In SLC mode, the power is controlled solely by moving the pan. Full power is emitted when the pan is placed in the
centre of the hob. If you move the pan away from the middle, the power is reduced. If you move the pan back to the
centre of the hob, the power increases again. The display shows the effective power consumption at all times.
SLIDECONTROL mode active
Status indicator lights up continuously
Display shows: Power consumption in kW
• Switch-off
To switch off the InductCook
®
330 appliance, move the rotary switch to the off position (red line aligned with status
indicator). The status indicator is not lit. If the hob is still hot, a line appears on the display. This residual heat
indicator disappears automatically as soon as the hob has cooled down. Please note that the residual heat indicator
stops working as soon as the InductCook
®
330 appliance is disconnected from the mains supply.
Important: You should always place the pan in the centre of the hob (4) . This is the only way to ensure
even heating of the pan.
Important: You should always place the pan in the centre of the hob (4) . Only then will the pan type
recognition function be able to select the optimum setting for the pan being used.
16
