Introduction
The following pages contain important information and advice about your InductCook
®
330 appliance. They explain
how to start it, operate it and care for it properly. Where necessary, attention is drawn to the differences between
specific models. Please read these operating instructions carefully before using your InductCook
®
330 appliance for
the first time. Then store them in a secure place so that you can refer to them quickly if required.
The InductCook
®
330 was developed to cook food and to meet all specific needs of high class hotels and hospitality.
Besides the high quality, we also focus on premium design and easy handling.
Technical Information to the InductCook® 330
Voltage range
220 – 240 V AC
Maximum input power
3,5 kW
Electrical fuse protection
12 A
Frequency
50-60 Hz
Dimensions
360 x 390 x 125mm
Weight
13,6 kg
Initial Start-up
Remove all remaining packaging and check your InductCook
®
330 appliance for external damage. Do not start the ap-
pliance if there are any signs of damage. To make the transport of your InductCook
®
330 appliance easier in the future,
please keep the original packaging.
Your InductCook
®
330 appliance must be placed on a flat surface. This surface must be capable of supporting a weight
of at least 50 kg. The rotary switch must be readily accessible. Do not cover the air inlet area on the front of the appli-
ance. The air inlet temperature must be lower than 40 °C. There must be a gap of at least 5 cm between the rear of the
appliance (air outlet area) and the wall or the closest object.
Check the mains voltage and make sure that it matches the voltage specified on the rating plate of your InductCook
®
330 induction appliance. Please ensure that your InductCook
®
330 appliance is positioned correctly and that it does not
wobble, and make sure that all rotary switches are in the off position (red line aligned with status indicator). Connect
your InductCook
®
330 appliance to the mains supply by plugging it in.
If your InductCook
®
330 model does not have a pre-fitted plug, if you intend to change the plug or if you want to
connect the InductCook
®
330 appliance directly to the mains supply, the electrical installation work must be carried
out in accordance with the specific national and local regulations by an approved electrical installation firm. It is ab
-
solutely essential to heed the information on the rating plate, the warning symbols and the safety regulations.
14
